My Clasp, My Clasp, My Kingdom For A Clasp!
The Jewelry Designer makes many choices when creating a piece of jewelry. Lots of things to manage and accomplish.
Probably the two most important choices, right up front, in creating a wearable art-piece that will be around for future generations are your:
(1) Stringing Material, and
When you work with so many customers in a store, and so many students in classes, you begin to see that people are not necessarily that great in selecting clasps. Many are in a clasps-rut — they use the same clasp over and over again.
Others pick out clasps they find appealing, whether or not they would visually or functionally work with the piece they have made.
Few people anticipate how they are going to attach the clasp to their beadwork, often resulting in an overly long, awkwardly connected clasp assembly.
So, how to you go about choosing clasps?
Clasps always seem like they’ve been someone’s last thought. They should be the first thought. Or at least thought about concurrently with the design of the piece. But they should never be the last thought.
As clasps should be thought of in their entirety — as clasp assemblies. Clasp assemblies include all the rings, loops and other hardware necessary to attach the clasp to the beadwork. The clasp itself may be beautiful, but the entire clasp assembly may not be.
But many people get so excited creating their beadwork, that they forget about the clasp — until the last moment. You can tell when the jewelry maker hasn’t put much thought into their choice of clasp in many ways. Often, the clasp doesn’t look like it was meant to go with the bead work or general design. It might be out of proportion. It might be a different texture or sensibility. Its function — how you open and close it, while wearing your jewelry — might seem odd, perhaps unnatural. And not only does the choice of clasp seem as an after-thought, but how to attach to the bead work to that clasp seems un-thought out, as well.
So it’s not surprising, that when we were repairing jewelry on a regular basis, about 80% of the pieces to be fixed had broken at the clasp.
It is best to, in part, build your design around your clasp. If your piece has a centerpiece or focal point, then how does this link up to or coordinate with the clasp. At the least, when visualizing your beadwork, include an image of the clasp and how it is attached at both ends. The world is full of clasps. Not every clasp is a jeweler’s best friend. But it depends.
The clasp needs to visually fit with the beadwork. It needs to function as the artist intended. It needs to function in a way the wearer can relate to, use and handle. It needs to be appropriate for the piece and the context in which it is too be worn. It should not compete with the beadwork. It should complement it. Ideally, at least from a design perspective, your clasp should look and feel as if it were an integral part of the entire piece.
In a Gallery setting, if you are selling your jewelry there, you usually want a very functional, but not overwhelming, clasp. You are selling your beadwork, and you don’t want your clasp to compete with this.
In a Department Store, setting, however, often the clasp sells the piece. In this setting, choosing a clasp requires a different kind of logic, thinking and anticipation.
Some clasp-types are “expected” to be a part of the piece — even if the particular choice of type would not be the best choice in the world. Traditions dictate clasp choices in some situations.
The former owner of a local Tennessee pearl company was very frustrated with clasps. She sold a lot of finished pearl jewelry at very high prices, and had been using 14KT gold pearl and safety clasps. Her customers sent a lot of their pearl necklaces and bracelets back for repairs, because their clasps broke. And this company felt, because the prices of these pieces were very high, that they were obligated to replace the clasps and re-string these pearl-knotted pieces at no additional charge. 14KT clasps — particularly the pearl, safety and filigree box clasps — do not hold up well, because gold is a very soft metal.
Replacing clasps on a pearl-knotted piece is quite some job. You have to cut up the piece to free up each bead, and then you begin the knotting and finishing off processes again. It turns out, the 14KT clasps were not the only expensive part of the bracelets — making the knots between each pearl was the time-consuming and costly part.
She desperately wanted to reduce the number of repairs. Her first idea was to replace the pearl and safety clasps with other styles which were sturdier. However, these pieces didn’t sell. People wanted the pearl and filigree clasps. The designs of these clasps were so traditional and so locked into their expectations for what pearl-knotted jewelry should look like, that they would not compromise.
Her second effort, she tried replacing the 14KT pearl and filigree clasps with gold-filled ones which were stronger, but this made her customers very angry — they wanted 14KT gold.
So, her final strategy, she returned to using 14KT gold pearl clasps, and doubled her prices. She built in the cost of one repair into the prices she charged. And only then could she present her happy face to her customers, and her somewhat-happy face to herself when she was in private.
Other Articles of Interest by Warren Feld:
I hope you found this article useful. Be sure to click the CLAP HANDS icon at the bottom of this article.
Enroll in my jewelry design and business of craft video tutorials online.
Add your name to my email list.
SO YOU WANT TO BE A JEWELRY DESIGNER
Merging Your Voice With Form
PEARL KNOTTING…Warren’s Way
Easy. Simple. No tools. Anyone Can Do!