What Glue Should I Use? …When Making Jewelry

Warren Feld
14 min readApr 14, 2020

--

WHAT GLUE SHOULD I USE?

I often get many questions about what glue to use with rhinestones and other beading and jewelry-making projects. I design jewelry. I do some silversmithing, wire working, bead stringing, bead weaving, kumihimo, and other techniques in my designs. I have been beading and making jewelry for over 30 years, and own a bead shop in Nashville, Tennessee.

When you make jewelry and need an adhesive to attach one component to another, to embellish a piece with stones, to secure a clasp, or to finish off or begin a new stringing material, you have certain issues you need to contend with.

First, all jewelry moves when worn. This results in a tremendous amount of force placed on the jewelry, increasing stresses and strains. You want the glue-bond to be able to resist, or better accommodate, these forces.

Second, you do not want your glue-bond to expand when dry.

Third, you want your glue-bond to dry clear.

Fourth, you want your glue-bond to withstand the very cold and very hot extremes of temperature where you live.

You want your glue to be able to bond to the materials you are working with.

You want to easily wipe off and remove the excess glue from your piece.

Nothing is perfect, but based on our experiences, here are some good tips:

(1) Always experiment with your adhesives first, before you use an adhesive on your final project. No one glue works with every project.

(2) Glues vary widely in terms of which materials they stick to, how well they form a bond between two smooth surfaces, and how the glue bond ages, both in terms of durability and color, and whether the glue expands in volume after it dries, or not.

(3) Clean the excess glue off your piece before you display or sell it.

(4) You will probably have to rely on more than one type of glue to accommodate all your types of projects.

Jeweler’s glues are the perfect choice in most situations. Jeweler’s glues dry like rubber, so the bond acts as a shock absorber. They also dry clear and without expansion. Jeweler’s glues take 24 hours to dry hard. They begin to set in 10 minutes, so you can move things and re-position them, if you want, during these 10 minutes. At 20 minutes, the consistency is like rubber cement. Excess glue can easily be rubbed off with your fingers or pulled off with a tweezers.

The two brands I use the most are E6000 and Beacon 527. The glues are very similar. E6000 is very thick. Beacon 527 is very runny. Beacon 527 begins to set a little faster.

E6000 and Beacon 527

My favorite glue is referred to as a 1-part epoxy (but it’s not really an epoxy). “1-part” means that you don’t have to mix anything to make the glue — it just comes out of a tube. One brand is called E6000, and this version of the glue is thick in consistency. Another version of the glue is called Beacon 527. This glue is runny. Some people prefer one or the other. E6000 is the first one I used, and I prefer that one. But I actually use both where I think the thickness or the runnyness might be an advantage. There are other brands as well.

Perfect for attaching findings to base metal and costume jewelry pieces. Also, use E-6000 on bead strands to seal end knots and to provide a strong, flexible seal that won’t become brittle or damage the bead cord. E-6000 is safe for use with virtually every type of gemstone and works on wood, leather, vinyl, and canvas.

Non-corrosive and self-leveling, E-6000 adheres in 5 to 10 minutes, and hardens to a clear, waterproof cure in 24 hours. This means you have about 10 minutes to position and reposition whatever you are gluing. After about 20 minutes, you can take your finger and/or a tweezers and rub off any glue that has oozed out from any edges or around any pieces. If you are making jewelry, you should let the piece dry “hard” overnight, before you wear it.

E-6000 dries like rubber, so the glue acts like a shock absorber, as your jewelry moves.

Drawbacks: It doesn’t bond well between two smooth pieces of glass. Here it’s a good idea to rough up the surface a bit with steel wood or sand paper or metal file. It doesn’t bond well to very oily surfaces.

Superglue

Superglue is not our favorite! Superglue has very few uses in jewelry design. It often ruins rhinestones (it discolors them and makes them cloudy) and other pieces we use in jewelry-making. It’s bond is tough, but it breaks easily when pieces move. Superglue dries like glass, and the bond shatters like glass. Moreover, the shattered bond looks like a piece of broken glass, so if any stringing material is nearby, the bond can cut it. It is terrible with elastic string.

We do, however, use superglue occasionally.

Cement or Glue?

A glue works by surrounding or closing in on an object. As the solvent in the glue evaporates, it’s “collar” gets tighter and tighter.

A cement works by adhering to all the individual fibers or elements of the materials you are using.

G-S Hypo Cement

This is the jeweler’s version of superglue. It doesn’t dry instantly like superglue. It takes about 20 minutes to set. It’s bond is like that of superglue.

We often use it to seal end knots, or coat a frayed strand of cord. We sometimes use it on crimp beads to enhance the closure. Unlike its super glue cousin, G-S Hypo Cement takes several minutes to set, so you can move things around during this time.

This glue has a very ultrathin needle point to get into very tight spaces.

G-S Hypo Fabric Cement

This version of g-s hypo cement is perfect for gluing knots in fibrous materials, especially silk. Great with any bead cord or stringing material made with natural materials.

Fabric Glue or Fabri Tac

Fabric and bead cords are made up of many, many micro fibers. It is important for the glue to bond to all these fibers, else, the bond won’t hold. While I prefer the G-S Hypo Fabric Cement, these glues are a good substitute.

Hot Glue Guns

Hot glue guns are easy and fun to use. When the materials you are using are large and bulky, hot glue guns make the projects go faster.

The glue’s bond will not last forever. The glue will yellow with age. The bond weakens at body temperature. If you made a dangly pair of earrings, and hot-glued a rhinestone to the piece that touches the ear, the rhinestone will likely pop off when the earring is worn. If you hot-glued stuff on the dangle, you won’t have the same problem.

Gorilla Glues

This line of glues is very, very strong. However, the bond expands as the glue dries. Most versions do not dry clear. They discolor with age.

Elmers Glue and School Glue

These glues are safe for kids. They work OK, but the bonds weaken when wet, through washing or sweating.

About Gluing Rhinestones, Marcasites, and other Stones or Components

Your goals for gluing rhinestones into or onto a piece of jewelry or cloth or other surface are simple:

  1. A bond that sticks and is durable.
  2. A bond that does not ruin the materials you are using.
  3. A bond which dries clear and ages clear.
  4. Glue which will not show outside or over the edges of the stone.
  5. Glue where you can easily remove any excess glue that extends beyond the boundaries of the stone.
  6. Glue which does not expand when it dries.

Glue can adversely affect your materials, so you always want to do some pretesting! Also, some of the rhinestone and other glues you may use might be soluble in soapy water, such as when you wash your hands or wash dishes.

Rhinestones are foiled back pieces of acrylic, glass or crystal. Some glues will pull the foil off or make it crinkle. Some glues may make the rhinestones cloudy. This is especially true with acrylic and glass rhinestones, but not necessarily with crystal rhinestones.

I prefer to use E6000 when gluing these into settings, onto fabric, or onto other surfaces. This creates the strongest bond. Most E6000-stones glued onto fabric will survive the washing machine several times.

When we use E6000 with rhinestones, we put a little drop of glue on the end of a pin. Then we touch the glue to the back of the rhinestone. We maneuver the pin-glue-rhinestone over the place where we want the stone to be. Then we push the rhinestone in place with our finger, and simultaneously pull the pin away from the stone. After about 20 minutes, we rub the stone and around the stone with our finger or the pin to get any excess glue off.

Some additional suggestions about glues

A great book to buy is The Crafter’s Guide To Glues by Tammy Young. In it she discusses all the types of glues, including the following:

White glues, such as Elmer’s Glue All

- bond is not strong, so useful for lightweight objects only

- bond is not flexible, so not useful for things where there is movement

- may not dry clear

-materials used must be porous

Tacky glues, like hot glue gun

- usually dry clear and are flexible, but can wash out

- body temperature can weaken bond

Clear Craft Glues

- wash out easily

- for lightweight projects

Super Glue

- instant adhesive, that works with many smooth surfaces, but not well with smooth glass surfaces

- will cloud rhinestones

- especially good with plastic pieces

- water resistant, but not best choice for washable projects

- inflexible; does not work well where there is movement

High Tech Adhesives, like E6000 and Beacon 527

- not water soluble

- bonds to both porous and non-porous materials

- does not bond well to rubber

- sets slowly, so you can re-position things

- dries clear

Fabric Glues, like No-Sew

- holds up through several dry cleaning cycles

- formulated to glue fabric to fabric

- make also work well to glue various embellishments to fabric

Fusibles, where you melt the glue with an iron or another heat source, such as a transfer

- for applying appliques or transfers

- prewash all materials before fusing

Aquarium Glue (glass cements)

- great for bonding two smooth surfaces of glass

Clear Cements, like G-S Hypo Tube or Watch Crystal Cement

- Doesn’t dry as fast as super glue, so can do some re-positioning, but bonds strong like super glue

- Good to use for sealing knots in jewelry projects

- Not as strong as epoxies or high tech adhesives

- water resistant and not affected by temperature

As with anything you do as a bead and jewelry artist, you want to ask lots of questions and get lots of advice. You want to play with a wide variety of tools and glues and stringing materials and metals and beads. You want to experiment. Let yourself try and err.

This is a lot of information. But this Orientation is important. Very important. Making jewelry is very similar to building a bridge — you must be familiar with many kinds of materials, how the materials interrelate, and how you link and connect these materials in a durable and appealing piece which wears well, and moves well with the wearer.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

SUBSCRIBE

**Be part of a community of jewelry designers who recognize that we have a different way of thinking and doing than other types of crafters or artists.

Engage with a community. Benefit from its collective power — insights, reactions, feedback, foresight, and directing you to opportunities.

Never miss an update. You won’t have to worry about missing anything. Every new article of interest, and announcements about kits, workshops and webinars, chat group, feedback session, and special promotions, goes directly to your inbox.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Other Articles of Interest by Warren Feld:

Cleaning Sterling Silver Jewelry: What Works!

What Glue Should I Use When Making Jewelry?

Why Am I So Addicted To Beads?

A Very Abbreviated, But Not Totally Fractured, History of Beads

The Martha Stewart Beaded Wreath Project

When Choosing Colors Has You Down, Check Out The Magic Of Simultaneity Effects

The Use of Armature In Jewelry: Legitimate or Not?

Pearl Knotting Warren’s Way

Organizing Your Craft Workspace…Some Smart Pointers

You Don’t Choose Clasps, You Choose Clasp Assemblies

Know Your Anatomy Of A Necklace

Mini Lesson: Making Stretchy Bracelets

Mini Lesson: Making Adjustable Slip Knots With Thicker Cords

Mini Lesson: How To Crimp

Mini Lesson: Attaching End Caps, Cones, Crimp Ends

Mini Lesson: Brick Stitch

Mini Lesson: Flat Even Count Peyote

Mini Lesson: Ndebele Stitch

Mini Lesson: Petersburg Chain

Mini Lesson: Right Angle Weave

Jewelry, Sex and Sexuality

Everyone Has A Getting Started Story

The Nature-Inspired Creations of Kathleen

The Jewelry Designer’s Orientation To Glass Beads

The Jewelry Designer’s Orientation To Lampwork Beads

The Jewelry Designer’s Orientation To Crystal Beads

The Jewelry Designer’s Orientation To Seed and Cylinder Beads

The Jewelry Designer’s Orientation To Choosing and Using Clasps

I hope you found this article useful. Be sure to click the CLAP HANDS icon at the bottom of this article.

Also, check out my website (www.warrenfeldjewelry.com).

Subscribe to my Learn To Bead blog (https://blog.landofodds.com).

Visit Land of Odds online (https://www.landofodds.com)for all your jewelry making supplies.

Enroll in my jewelry design and business of craft video tutorials online.

Add your name to my email list.

__________________________________

CONQUERING THE CREATIVE MARKETPLACE: Between the Fickleness of Business and the Pursuit of Design

How dreams are made
between the fickleness of business
and the pursuit of jewelry design

This guidebook is a must-have for anyone serious about making money selling jewelry. I focus on straightforward, workable strategies for integrating business practices with the creative design process. These strategies make balancing your creative self with your productive self easier and more fluid.

Based both on the creation and development of my own jewelry design business, as well as teaching countless students over the past 35+ years about business and craft, I address what should be some of your key concerns and uncertainties. I help you plan your road map.

Whether you are a hobbyist or a self-supporting business, success as a jewelry designer involves many things to think about, know and do. I share with you the kinds of things it takes to start your own jewelry business, run it, anticipate risks and rewards, and lead it to a level of success you feel is right for you, including

· Getting Started: Naming business, identifying resources, protecting intellectual property

· Financial Management: basic accounting, break even analysis, understanding risk-reward-return on investment, inventory management

· Product Development: identifying target market, specifying product attributes, developing jewelry line, production, distribution, pricing, launching

· Marketing, Promoting, Branding: competitor analysis, developing message, establishing emotional connections to your products, social media marketing

· Selling: linking product to buyer among many venues, such as store, department store, online, trunk show, home show, trade show, sales reps and showrooms, catalogs, TV shopping, galleries, advertising, cold calling, making the pitch

· Resiliency: building business, professional and psychological resiliency

· Professional Responsibilities: preparing artist statement, portfolio, look book, resume, biographical sketch, profile, FAQ, self-care

548pp.

Kindle, Print, Epub

SO YOU WANT TO BE A JEWELRY DESIGNER
Merging Your Voice With Form

So You Want To Be A Jewelry Designer reinterprets how to apply techniques and modify art theories from the Jewelry Designer’s perspective. To go beyond craft, the jewelry designer needs to become literate in this discipline called Jewelry Design. Literacy means understanding how to answer the question: Why do some pieces of jewelry draw your attention, and others do not? How to develop the authentic, creative self, someone who is fluent, flexible and original. How to gain the necessary design skills and be able to apply them, whether the situation is familiar or not.

588pp, many images and diagrams Ebook , Kindle or Print formats

The Jewelry Journey Podcast
“Building Jewelry That Works: Why Jewelry Design Is Like Architecture”
Podcast, Part 1
Podcast, Part 2

PEARL KNOTTING…Warren’s Way
Easy. Simple. No tools. Anyone Can Do!

I developed a nontraditional technique which does not use tools because I found tools get in the way of tying good and well-positioned knots. I decided to bring two cords through the bead to minimize any negative effects resulting from the pearl rotating around the cord. I only have you glue one knot in the piece. I use a simple overhand knot which is easily centered. I developed a rule for choosing the thickness of your bead cord. I lay out different steps for starting and ending a piece, based on how you want to attach the piece to your clasp assembly.

184pp, many images and diagrams Ebook, Kindle or Print

SO YOU WANT TO DO CRAFT SHOWS:16 Lessons I Learned Doing Craft Shows

In this book, I discuss 16 lessons I learned, Including How To (1) Find, Evaluate and Select Craft Shows Right for You, (2) Determine a Set of Realistic Goals, (3) Compute a Simple Break-Even Analysis, (4) Develop Your Applications and Apply in the Smartest Ways, (5) Understand How Much Inventory to Bring, (6) Set Up and Present Both Yourself and Your Wares, (7) Best Promote and Operate Your Craft Show Business before, during and after the show.

198pp, many images and diagrams, Ebook, Kindle or Print

BASICS OF BEAD STRINGING AND ATTACHING CLASPS

Learning Bead Stringing Is More Than
Putting Beads On A String And Tying On A Clasp

There is an art and skill to stringing beads. First, of course, is the selection of beads for a design, and the selection of the appropriate stringing material. Then is the selection of a clasp or closure, appropriate to the design and use of the piece.

You want your pieces to be appealing. You want them to wear well. You want someone to wear them or buy them. This means understanding the basic techniques, not only in terms of craft and art, but also with considerations about architecture, mechanics, and some sociology, anthropology and psychology.

In this book, I go into depth about: (1) Choosing stringing materials, and the pros and cons of each type, (2) Choosing clasps, and the pros and cons of different clasps, (3) All about the different jewelry findings and how you use them, (4) Architectural considerations and how to build these into your pieces, (5) How better designers use cable wires and crimp, as well as, use needle and thread to string beads, (6) How best to make stretchy bracelets, (7) How to make adjustable slip knots, coiled wire loops, and silk wraps, (8) How to finish off the ends of thicker cords or ropes, so that you can attach a clasp, (9) How to construct such projects as eyeglass leashes, mask chains, lariats, multi-strand pieces, twist multi-strand pieces, and memory wire bracelets, (10) How different teaching paradigms — craft vs. art vs. design — might influence the types of choices you make.

452 pp, many images, illustrations, diagrams, Ebook, Kindle or Print

___________________________________________

Your membership fee directly supports Warren Feld and other writers you read. You’ll also get full access to every story on Medium. CLICK To Find Out More.

--

--

Warren Feld
Warren Feld

Written by Warren Feld

Beading and jewelry making have been wonderful adventures, from custom work, production work, and teaching. *Design is about the ability to make smart choices.

No responses yet